APC Rack PDU 2G
Rack PDU 2G, Metered-by-Outlet, ZeroU, 32A, 230V, (21) C13 & (3) C19 PN AP8453
Presentation:
APC Metered by Outlet Rack Power Distribution Units (PDUs) provide individual outlet power metering to enable energy optimization and circuit protection. Current metering provides real-time remote monitoring of connected loads. Metered by Outlet Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered by Outlet Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered by Outlet Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
Lead time:
– Usually in Stock
Provided equipment :
– CAN port terminator
– Installation guide
– Rack mounting brackets
– Safety guide
– Serial configuration cable
Physical :
– cable length : 3.00 m
– colour : Black
– depth : 5.1 cm
– height : 182.9 cm
– net weight : 8.21 kg
– width : 5.6 cm
Input :
– permissible voltage : 220…240 V
– Max line current : 32 A
– input current limits : 32 A
– Load capacity : 7400 VA
– network frequency : 50/60 Hz
– plug standard : IEC 60309 32 A 2P + E
– input voltage : 200 V, 208 V, 230 V
Output:
– number of power socket outlets : 21 IEC 60320 C13 , 3 IEC 60320 C19
Enviromental:
– ambient air temperature for operation : -5…45 °C
– relative humidity : 5…95 %
– operating altitude : 0…10000 ft
– ambient air temperature for storage : -25…65 °C
– storage altitude : 0.00…15240.00 m
