rocscience Software

Rocscience RocSlope

3D Block Stability Risk Assessment for Rock Slopes

Jual Rocscience RocSlope Indonesia

Model 3D Geological Structures

For 3D slope geometries of benches, highway cuts, and entire open pits, model structurally controlled failure in rock slopes exhibiting jointing (faults, joints, bedding, folds, foliations). Define joints as any combination of measured joints, synthetically sampled joint sets, or discrete surfaces, defined by orientation and location.

Rocscience RocSlope
Rocscience RocFall3

Block Stability Analysis

Determine all valid blocks which could be formed by the intersection of joints. Once blocks are computed, determine each block’s stability using the limit equilibrium method to obtain a factor of safety, taking into considering weight, shear strength, water pressure, loading and supports.

Predict the locations and magnitudes of failures over the extent of the slope by creating heat maps to show locations with the lowest factors of safety, largest failure volumes and depths, and greatest support requirements.

Probabilistic Analysis

Perform probabilistic analysis to model the variability in rock unit weight, joint shear strength, and water pressure parameters and obtain location-specific probabilities of failure. Generate statistical plots like histograms, cumulative and scatter plots for any selection of blocks, and fit distributions and regression lines through the data.

Rocscience RocSlope

Features in Rocslope

Technical Specifications

Import

  • Import .obj, .dxf, dtm and other common geometry files
  • Import geometry, properties, groundwater, and other entities from an RS3 file
  • Import geometry, properties, groundwater, and other entities from a Slide3 file
  • Import slope and joint geometry and joint properties from an SWedge file
  • Import properties from another RocSlope file
  • Import sensor data from various manufacturers
  • Import orientations and set statistics from a Dips file

Project Settings

  • Set design factor of safety as the failure threshold
  • Model successive failure from the detachment of key blocks
  • Probabilistic analysis with pseudo-random sampling for repeatable results
  • Eurocode and British Code design standards

Joints

  • Define joint orientation, location, and size from measured data
  • Define joint orientation, location, and size from synthetically-generated joint set with statistical sampling of orientation, size, and spacing along a traverse line
  • Define joints from any arbitrary surface or collection of planar surfaces
  • Define joint properties with shear strength, waviness, and water pressure parameters
  • Show trace lines for daylighting joints along the the slope surface

Shear Strength

  • Mohr-Coulomb
  • Barton-Bandis
  • Hoek-Brown
  • Generalize Hoek-Brown
  • Power Curve
  • Override shear strength by material

Water Pressure

  • Water surfaces from arbitrary surface, points, or boreholes
  • Water pressure grids
  • Ru coefficient
  • Constant water pressure

Slope

  • Define multiple geology volumes
  • Define material properties with unit weight, and groundwater parameters
  • 3D geometry tools to build, modify, and cleanup geometry pieces

Analysis

  • Compute blocks which can be formed by the intersection of joints
  • Compute kinematics using limit equilibrium method to obtain driving and resisting forces and the resulting factor of safety for each block
  • Add search limits for inclusion and exclusion volumes in computation

Analysis Results

  • Advanced report generation
  • Listing of all block information
  • Detailed block information
  • Block contour of factor of safety, weight, volume, required support pressure, failure depth, and probability of failure

Loading

  • Point, line, or distributed loads
  • Seismic loads
  • Water pressure inside joints

Support

  • Active or passive rock bolts
  • Active or passive support pressure
  • Shotcrete

Probabilistic Analysis

  • Statistical distributions: normal, uniform, triangular, beta, exponential, lognormal, gamma
  • Plot histogram, cumulative, and scatter plots of input random variables or computed values
  • Probability of failure, and other critical values
  • Monte-Carlo or Latin-Hypercube simulation methods
  • Best fit distribution, regression line
  • Model numerical parameters from material properties and joint properties as random variables

Viewing Options

    • Advanced filtering using conditional expressions to query block information
    • Color blocks by material property color, joint property color, random color, or contour color
    • Results toggle showing all valid blocks, removable blocks or failed blocks subsets
    • Translate block(s) in the block’s sliding direction
    • Create a cropped slope cut around selected block(s)

RocSlope across Applications

Assess and locate large and small-scale failures across the benches of an open pit as part of optimal pit design, safety planning and risk mitigation during the design and operational stages.

 

Geological hazard assessment of the stability of rock slopes adjacent to or overlying civil infrastructure such as roads, highways, railways, and bridges. Apply slope stabilization measures by modeling the effects of rock reinforcements and drainage.

Explore the latest features in RocSlope

Display a listing of all block results including information about geometric removability, factor of safety, weight, volume, driving and resisting forces, sliding direction, failure mode, required support pressure, and failure depth. You can filter and export this information as a CSV file.

 

Focus on critical regions of your model by adding volumetric limits as any combination of inclusion and/or exclusion zones for the computation of blocks along portions of the slope.

Identify key blocks which control potential large-scale failures of the slope and simulate the successive unraveling of the slope as key blocks fail and are detached.

Rocscience Products

Rocscience RSPile

Rocscience RSPile

rocscience SoftwareRocscience RSPile 3D Pile Analysis Lateral & Axial Pile Analysis Carry out lateral & axial analyses of various piles with the flexibility to design piles with multiple sections and model complex soil strata using boreholes. Capacity Pile...

Rocscience Settle3

Rocscience Settle3

rocscience SoftwareRocscience Settle3 Soil Settlement and Consolidation Analysis Settlement Analysis Perform soil settlement analysis to analyze immediate settlement, primary consolidation and secondary settlement of embankments, foundations, and surface loads. Easily...

Rocscience CPillar

Rocscience CPillar

rocscience SoftwareRocscience CPillar Support Estimation Using Ground Reaction Curves Crown Pillar Stability Analysis Get quick and easy stability analysis of surface or underground crown pillars and laminated roof beds using three different limit equilibrium analysis...

Rocscience RocSupport

Rocscience RocSupport

rocscience SoftwareRocscience RocSupport Support Estimation Using Ground Reaction Curves Ground Reaction Curve Easy-to-use software for estimating deformation of circular excavations in weak rock. Given the tunnel radius, in-situ stress conditions, rock parameters and...

Rocscience UnWedge

Rocscience UnWedge

rocscience SoftwareRocscience UnWedge Underground Wedge Stability Analysis Underground Wedge Stability Analysis Analyze underground tunnel excavations with intersecting discontinuities and visualize the model in 3D. Determine the stability of tetrahedral wedges formed...

Rocscience EX3

Rocscience EX3

rocscience SoftwareRocscience EX3 3D Stress Analysis for Underground Excavations Boundary Element Method & Stress Analysis Perform faster analysis of underground excavations using Boundary Element Method, which only requires meshing of the surface, resulting in...

Rocscience RSLog

Rocscience RSLog

rocscience SoftwareRocscience RSLog Web-based Borehole Log Management Borehole Data Management Centralize your borehole data and streamline the process of field data collection, review, and preparation of borehole logs. Designed for geotechnical, environmental, and...

Rocscience RocTopple

Rocscience RocTopple

rocscience SoftwareRocscience RocTopple Toppling Stability Analysis for SlopesBlock Toppling Model Analyze 2D block or block-flexural toppling stability given the slope geometry, and the joint spacing, dip and strength. RocTopple employs the Block toppling method of...

Rocscience RocPlane

Rocscience RocPlane

rocscience SoftwareRocscience RocPlane Graphical and Statistical Analysis of Orientation DataPlanar Rock Slope Analysis Quickly and easily define planar wedge models, visualized in 2D and 3D. Perform planar sliding stability analysis using Limit Equilibrium Method....

Rocscience Dips

Rocscience Dips

rocscience SoftwareRocscience Dips Graphical and Statistical Analysis of Orientation DataStereographic Projection Analysis Designed for interactive analysis of orientation based geological data. Visualize orientation vectors, density contours, planes, intersections,...

Rocscience RSData

Rocscience RSData

rocscience SoftwareRocscience RSData Strength & Stress Analysis of Rock and Soil MaterialsVirtual Soil Mechanics Lab Utilize constitutive models like NorSand and Modified Cam Clay to get an in-depth look into the stress-strain relationship of your soil materials....

Rocscience RocFall3

Rocscience RocFall3

Rocscience Software rocscience SoftwareRocscience RocFall3 3D Assessment of Slopes at Risk for Rockfalls3D Model Creation Constructing rockfall models is easier and faster than ever. Import ground surfaces from geological modelling or mine planning software or with...

All Products

Adobe Premiere Pro 2024

Adobe Premiere Pro 2024

software adobe Adobe Premiere Pro Solusi Profesional untuk Setiap Kebutuhan Editing Video Apa yang Baru di Adobe Premiere Pro Versi Terbaru?Rilisan Premiere Pro versi 25.0 dilengkapi panel Properti baru yang peka terhadap konteks, desain yang segar dan modern, serta...

Adobe Acrobat Pro 2024 Terbaru

Adobe Acrobat Pro 2024 Terbaru

software adobe Adobe Acrobat Pro Solusi Cerdas untuk Mengelola dan Mengamankan Dokumen PDF Apa yang Baru di Adobe Acrobat Versi Terbaru?Adobe Acrobat terus mengembangkan fitur-fiturnya untuk meningkatkan pengalaman pengguna dalam membaca, mengedit, dan mengelola...

Windows Server 2025 Terbaru

Windows Server 2025 Terbaru

software microsoftWindows Server 2025Windows Server 2025Windows Server 2025 Standard siap menjadi pembaruan signifikan yang berfokus pada lingkungan cloud hybrid dan adaptif. Hal ini mencerminkan komitmen Microsoft terhadap inovasi berdasarkan masukan pengguna....

Open chat
Scan the code
Hallo..
Ada yang bisa kami bantu? Bisa di info mengenai kebutuhannya?

By Computer Indonesia